Energy Saving Tips for Commercial Buildings in The United Kingdom

Almost 20% of businesses in the United Kingdom spend more than £250,000 annually on commercial energy management – a substantial expense no matter how you look at it. Residential and commercial buildings report for 40% of the US total electricity consumption, but the capability managers can reduce the usage of electricity of individual buildings by 30% throughout aggressive protection efforts. According to the Daily Telegraph, “54% of the senior managers had no idea who was responsible for energy management in their organization and 46% of senior managers did not know about their company’s energy costs”. It seems like corporate management is oblivious to some of the tips and myths that have been debunked about energy management in this article. Even a small change can easily leads to a 10% reduction in electricity expenditure according to conventional estimates.

1. Understanding Electricity Consumption

The first crucial step to securing savings on electricity consumption for a building understands current electricity consumption. Try to identify trends or patterns of consumption if this is a skyscraper with multiple meters installed. Pinpoint electricity consumption based on specific areas of the building as well as specific times of the day. You should be able to identify ‘red flags’ for excessive consumption based on an average set of data for each floor.

2. Take Charge

It is time to prepare an authorized team of professionals that will take charge of all of the energy-intensive processes. They will be armed with all the energy consumption information for the entire building based on the times of consumption and energy-locale consumption. This team will be able to identify standards and regulations for the optimal environmental conditions for the building. The team should have the authorization to pre-program lights, sensory switches for the heating system, and other switches for the elevators that are designated in the Building Energy Management System. Energy efficient lights will reduce your energy consumption via 25-80% while lasting 5-25 times longer rather than traditional lights.

3.  Maintaining Optimal Efficiency

It is important to identify faulty or obsolete equipment that is no longer productive to the overall environment of the building. Operating these kinds of equipment can easily incur heavy energy costs in a short time. Make sure that the entire building uses the same energy efficiency rating equipment to ensure that everything is in proper working order.

4. Refurbish & Replace

Once you have identified all of the faulty or obsolete equipment it is time to impart energy-efficient equipment that will be productive in securing long-term energy savings. This means that light switches will be installed with presence detectors and light sensors. The LED lamps must have efficient dimmers that reduce electricity consumption. Similarly, the HVAC system needs to be installed with careful consideration to its energy efficiency rating and overall performance of the HVAC system. You might face high costs installing a new HVAC system but the returns on the HVAC system are in the form of lower overall energy consumption and costs.

5. Managing Consumption

Energy prices vary based on the amount of consumption and the time of consumption. This means that using large amounts of energy during peak hours can be extremely expensive in comparison to scheduling it during off-peak hours. According to the Authorised Supply Capacity (ASC), large electricity consumers are subject to the limits of energy consumption. The building should deploy a system so that they can schedule significant consumption during off-peak hours to ensure minimal expenses.

6. Develop Roof insulation:

A workplace construction loses 20 percentage of its warmness through the roof. Raising the roof’s R-cost through including extra insulation can scale down those losses and may recoup the cost in as low as one to 4 years. Eventually, the insulation can turn out to be much less powerful because it will become greater compact, so construction managers should not handiest rely upon preceding R-cost numbers to determine in the event that they need to upload greater insulation. Adding lovers to flow into heat air to reach the pinnacle degree of a construction also can lower heating costs.

7. Manage the using of water:

WaterSense urinals and bathrooms can lower water intake with each flush. Providing water-green taps outfitted with automated off/on sensors additionally limits water intake. Installing the tankless water warmers in regions that seldom want warm water also can lessen the strength expenditure compulsory to preserve water warm on demand.

8. Edify building tenant:

Initiatives that assist teach personnel and different constructing tenants approximately strength intake can lessen strength intake through 10 percentages. For example, transportable warmers can skew thermostat readings happening a whole floor, relying on their place. Facility managers need to give an explanation for a way to notify control of a hassle with temperature, as a result a floor-huge answer may be enacted plus all personnel stay comfortable.

Employees also like to work in a company which shows interest in the environment. More than 80% of employees loved to work in a positive environmentally reputed company.

9. Eliminate tiny energy drains:

Construction managers need to not forget changing bulbs inside lit symptoms and symptoms with LED lights, which use much less strength and should get replaced much less often. Spinning off the lighting in merchandising machines, at the same time as nevertheless permitting the gadget to stay functional, also can lessen universal energy usage.

10. Utilize IoT solutions:

Construction managers need to make adjustments in prepared timing to repair the constructing to its maximum viable strength efficiency. By the usage of sensors to music and perceive viable inefficiencies, the facility supervisor can awareness his attention at the regions that constitute the best viable strength savings.


 Demand for energy is increasing day by day so it is very important to save energy not only for saving money and cost but also for the future generation as the supply of energy is not increased so much compared to the demand. Most of the energy is generated through fossil fuels. As a result humans are facing the biggest problem: global warming. So follow these tips for saving your money as well as nature.

Leave a Comment